PETTIT PAINT Copper Bronze Antifouling Paint 1 Quart

Description

A traditional favorite

Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33.2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color.

Key features

Cuprous oxide for aggressive fouling protection
Modified epoxy with a hard finish, withstands season-long use
Compatible over previously applied antifoulings
Great protection for trailered boats

Physical Data

Type: Modified Epoxy/Rosin
Finish: Flat
Available colors: Brown
Components: 1
Curing mechanism: Solvent Release
Solids by weight: (Theoretical): 74% +/- 2%
Solids by volume: (Theoretical): 49 +/- 2%
Coverage: 400sq.ft. /gallon
VOC: 440 grams/liter (Max)
Active ingredients: Cuprous Oxide
Flash point: 100°F

Application

Application Method: Brush, roller, conventional spray, airless spray
Number of coats: recommended: 2
Dry Film Thickness: 2 mils
Wet Film Thickness: 4.1 mils
Applicator: High-quality short nap roller (maximum 3/8” nap)
Application temperature: Min. /Max. Range: 90° F. Min/40°F. Max
Thinner: Pettit 120 Brushing Thinner (Models 249953, 249961); Pettit 121 Spraying Thinner (Models 249987, 249995)

Drying times (Hours)

Drying	@40°F	@70°F	@90°F
To recoat	6 hr.	4 hr.	2 hr.
To launch	24 hr.	16 hr.	8 hr.

*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.

Get the right amount of paint:

Boat Type	Bottom Paint
10′ Dinghy	1 qt.
14′ Outboard	1-2 qt.
18′ Runabout	2 qt.
20′ Sailboat	3 qt.
24′ Runabout	3-4 qt.
30′ Sailboat	1.5 gal.
32′ Cruiser	1.5-2 gal.
36′ Auxiliary	2 gal.
40′ Cruiser	2.5 gal.
45′ Sailboat	3-3.5 gal
50′ Sportfisher	4+ gal.

Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula:

Length x Beam x .75 = Approximate underwater surface area in square feet.

Each paint has a “theoretical coverage” area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value.

More Information

For detailed application instructions and to view available colors, see the Pettit copper bronze Data sheet.

NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.

Reviews

There are no reviews yet.

Be the first to review “PETTIT PAINT Copper Bronze Antifouling Paint 1 Quart”